Altai CX200 Dual Band Wave 2 Wi-Fi AP
)
Price in Bangladesh
The lowest price of Altai cx200 dual band wave 2 wi-fi ap in Bangladesh is Tk-35,500/= only. Buy CX200 at low price in Bdstall. There is currently 0 seller.
Full Specification
| Model | ✅ CX200 |
|---|---|
| Connectivity | Outdoor |
| Wi-Fi | 802.11b / g / n & 802.11a / n / ac Wave 2 |
| WAN Port | 10 / 100 / 1000 Mbps ethernet port |
| Speed | Up to data rates of 867Mbps on 5GHz and 400Mbps on 2.4GHz |
| Range | 300 meter at 2.4 GHz & 200 meter at 5 GHz |
| Security | Open authentication, Shared key, WPA / WPA-PSK, WPA2 / WPA2- PSK, WPA3, 802.1x at EAP-PEAP / TLS / TTLS / SIM / AKA, Encryption WEP / TKIP / AES, Inter / Intra-SSID client isolation, MAC-based access control at the white and black list, Radius / Active directory, Dynamic VLAN assignment, Firewall, WIDS / WIPS, Broadcast / Multicast / Unicast flooding control |
| Other Features | 174 x 112 x 31 mm dimension & 0.3 kg weight |
- Both 2.4 and 5 GHz frequency features 32 SSID and 16 SSID per radio, WMM, 802.11h, 802.11k, 802.11r, 802.11v, 802.11w, Passpoint release 2, Fast roaming, Band steering / Multi-AP steering, Smart load balancing, Dual-radio 1+ 1 redundancy, Smart mesh networking, Auto channel selection, and TX power control, Bandwidth control per SSID / client, Altai AirFi throughput optimization
- It includes a 2.4 GHz antenna that features an antenna connector 2 x RP-SMA female, an external antenna 5 dBi Omni, and also contains 5 GHz antenna that provides an antenna connector 2 x RP-SMA female, an external antenna 5 dBi Omni
- Its network features switch bridge and gateway mode, IPv4/IPv6 dual-stack, NAT, DHCP client / server, PPPoE client, soft-GRE, VLAN, Multicast rate filter / IGMP snooping
- The wireless interface features access point / CPE / Repeater operating mode, Standard IEEE 802.11b / g / n, 2.400 to 2.835 GHz operating frequency, Transmit power 22 dBm maximum, 19 dBm per chain, Receiver sensitivity typical, 802.11b 11 Mbps -84 dBm; 1 Mbps -92 dBm, 802.11g 54 Mbps -72 dBm; 6 Mbps -89 dBm, 802.11n HT20 -87 dBm; HT40 -84dBm and also features operating mode access point / CPE / Bridge, Repeater, Standard IEEE 802.11a / n / ac, MU-MIMO up to 2 streams, Operating frequency are 5.150-5.250 GHz, 5.250-5.350 GHz, 5.470-5.725 GHz, 5.725-5.850 GHz, Transmit power 22 dBm maximum, 19 dBm per chain, Receiver sensitivity typical, 802.11a 54 Mbps -71 dBm; 6 Mbps -89 dBm, 802.11n HT20 -89 dBm; HT40 -86 dBm, 802.11ac VHT20 -89 dBm; VHT40 -85 dBm; VHT80 -83 dBm
- Its management platforms are AltaiGate, AltaiCare also features web user interface, Command-line interface SSH, Remote factory reset, Trusted management IP list, SNMP v1 / v2c / v3, MIB2 / IF-MIB / Altai enterprise MIB, Syslog, Spectral analysis, KPI monitoring, Client OS and hostname detection
- Its operating temperature is -20 °C to +60 °C
- Its storage temperature is -40 °C to +80 °C
- Its humidity is up to 90 % when its non-condensing
- Its wind loading up to 200 km/h or124 mph
- The power supply is 802.3af PoE PD or 54 VDC passive PoE PD
- Its power consumption is up to 11.7 W
- It is weatherproof IP67 compliant
- It gets certifications from FCC / CE / Others and also RoHS compliance
Description
Altai CX200 dual-band wave 2 Wi-Fi access point includes unique Altai technologies to improve coverage, optimize capacity, reduce interference, and provide ultra-fast data speeds of up to 867 Mbps on 5 GHz and 400 Mbps on 2.4 GHz. The CX200 is a great choice for tough climatic conditions, due to its IP67-rated waterproof shell. Because of its small size and low-profile housing, the gadget blends in well with any environment. With external RF connections, it offers a variety of antenna choices. The Omnidirectional antennas that come standard provide strong 360° coverage, while alternative high gain sectorized antennas can be utilized to increase directional coverage.
Popular Wireless Access Point Brand
