bdstall.com
Home  > Electrical Equipment  > IPS

INVT GooDrive350 18-kW VFD Inverter

ID: 85125 Status: Sold Out

Price in Bangladesh

The lowest price of Invt goodrive350 18-kw vfd inverter in Bangladesh is Tk-68,000/= only. Buy INVT GD350 18kW at low price in Bdstall. There is currently 0 seller.

Full Specification

Model ✅ INVT GD350 18kW
IPS Type Electric
Inverter Rated Power (Watt) 18 kW
Overloading Protection Yes
Overcharging Protection Yes
Short Circuit Protection Yes
Display LCD
  • Power input
    • Voltage (V)
      • AC 3PH 380V (-15%)-440V (+10%) rated voltage: 380V
      • AC 3PH 520V (-15%)-690V (+10%) rated voltage: 660V
    • Current (A): Refer to the rated value
    • Frequency (Hz): 50Hz or 60Hz, allowable range: 47-63Hz
  • Power output
    • Voltage (V): 0-input voltage
    • Current (A): Refer to the rated value
    • Power (kW): Refer to the rated value
    • Frequency (Hz): 0-400Hz
  • Technical control performance
    • Control mode: SVPWM control, SVC, VC
    • Motor type: Asynchronous motor, permanent-magnet synchronous motor
    • Speed regulation ratio: Asynchronous motor 1: 200 (SVC); Synchronous motor 1: 20 (SVC), 1:100 (VC)
    • Speed control precision: ±0.2% (SVC), ±0.02% (VC)
    • Speed fluctuation: ±0.3% (SVC)
    • Torque response: Less-than 20ms SVC), Less-than 10ms (VC)
    • Torque control precision: 10% (SVC), 5% (VC)
    • Starting torque
      • Asynchronous motor: 0.25Hz/150% (SVC)
      • Synchronous motor: 2.5 Hz/150% (SVC)
      • 0Hz/200% (VC)
    • Overload capacity
      • 150% of rated current: 1min
      • 180% of rated current: 10s
      • 200% of rated current: 1s
  • Peripheral interface
    • Terminal analog input resolution: No more than 20mV
    • Terminal digital input resolution: No more than 2ms
    • Analog input: 2 inputs, Al1: 0-10V/ 0-20mA; Al2: -10-10V
    • Analog output: 1 output, AO1: 0-10V/ 0-20mA
    • Digital input
      • Four regular inputs; maximum frequency: 1kHz; internal impedance: 3.3kQ
      • Two high-speed inputs; maximum frequency: 50kHz
      • Supports quadrature encoder input with speed measurement function
    • Relay output
      • Two programmable relay outputs.
      • RO1A NO, RO1B NC, RO1C common port
      • RO2A NO, RO2B NC, RO2C common port
      • Contact capacity: 3A/AC250V, 1A/DC30V
    • Digital output
      • One high-speed pulse output; maximum frequency: 50kHz
      • One Y terminal open collector output
    • Extension interface
      • Expandable PG card, programmable extension card, communication card, I/O card, and so on
      • Three extension interfaces: SLOT1, SLOT2, SLOT3
  • Running control performance
    • Frequency setup mode
      • Digital, analog, pulse frequency, multi-step speed running, simple PLC, PID, MODBUS communication, PROFIBUS communication, and so on
      • Realize the switch-over between the set combination and the set channel
    • Automatic voltage regulation function: Keep the output voltage constant
    • Features over 30 kinds of fault protection functions: overcurrent, overvoltage, under-voltage, over-temperature, phase loss, overload, and so on
    • Speed tracking restart function: Realize impact-free starting of the motor in rotating
  • Protection level: IP20
  • Pollution level: Level 2
  • Cooling mode: Air cooling
  • Brake unit
    • Built-in brake unit for 380V 37kW and below models
    • Optional built-in brake unit for 380V 45kW-110kW
    • Optional external brake unit for 660V models
  • EMC filter
    • 380V models fulfill the requirements of IEC61800-3 C3
    • The optional external filter should meet the requirements of 1EC61800-3 C2
  • Temperature of running environment: -10-50°C, derating is required if the ambient temperature exceeds 40°C
  • Installation mode: Support wall-mounting, floor-mounting, and flange-mounting

Description

INVT GooDrive350 18-kW VFD inverter features a wireless simple connection to the internet of things, inverter control via computer or mobile device, and real-time awareness of operational status. This inverter features controlled starting, controlled stopping, and controlled accelerating, as well as dynamic torque control, reduced peak energy demand, and power reduction while not in use. Additionally, it supports optional expansion cards for Ethernet, CANopen, Profibus DP, Bluetooth, and Profinet and works with both synchronous and asynchronous motors.

Popular IPS Brand
Question
0 Question
User Review
(0 Review)