bdstall.com
Home  > Networking  > Cable Tester

Noyafa NF-8601W PoE & Ping Cable Length Tester

ID: 94323 Status: Out of Stock

Price in Bangladesh

The lowest price of Noyafa nf-8601w poe & ping cable length tester in Bangladesh is Tk-29,900/= only. Buy Noyafa NF-8601W at low price in Bdstall. There is currently 0 seller.

Full Specification

Model ✅ Noyafa NF-8601W
  • Power supply: Lithium battery
  • Display  Screen: Color 
  • 2.8-Inch Color Screen
    • POE testing 
    • Length Testing 
    • Port flash
    • Ping testing
  • Button
    • Function Button
    • Back Button 
    • Power Button
    • Floodlight
    • Power Up
    • Power Down
    • Voltage Detecting
    • Scanning Indicator
    • LED Light Button
    • Volume Control
  • AC Voltage Detecting: Yes
  • Remote Unit: 8pc
  • Port
    • RJ45 port RJ11 port
    • BNC Line
    • TF Card PoE & Ping 
    • Charging Port
    • PoE & Ping Port
    • RJ45 Scan
  • Cable Testing  
    • RJ45 Cable
    • RJ11 Cable
    • BNC Cable
    • Cross, Short
    • Split Pair 

Description

Noyafa NF-8601W is a cross, open, short, split pair, etc PoE test and Ping test of power supply, power source, its loss, and data packet. It can accurately track and measure cable length without a remote connection. Its measurement accuracy is more than 98% Hub Blink detects network ports by flashing the port on the hub / switch. It can quickly find the target cable without disconnection between cables. It also has tone trace cables with AC interference rejection. It can store up to 160 groups of log data and measurement data on its internal micro SD card and export the data from a computer. It can adjust the sensing distance from 0 - 50 when the wire is in the wall or ceiling.

Review by Bdstall

Port Flash: It has POE & PING on one side which can be accessed by selecting Port Flash. It features a red circle that will flash at the same frequency as the switch's led light.

Cable Length Calibration: There may be some variation in testing this cable length. It uses a cable of more than 10 meters. Then the function can be entered to measure the length to get the result stored in the data device and loaded the next time the length is measured.

Question
0 Question
User Review
(0 Review)