Schneider Altivar 630 18.5 kW VFD Inverter
ID:
100572
Status: Out of Stock
-18%
)
)
)
Price in Bangladesh
The lowest price of Schneider altivar 630 18.5 kw vfd inverter in Bangladesh is Tk-194,000/= only. Buy at low price in Bdstall. There is currently 0 seller.
Full Specification
- Main
- Number of Input Phase: 3 Phase
- Number Of Output Phase: 3 Phase
- Input Voltage: 380-480VAC
- Output Supply: 380-480VAC
- Degree of protection: UL type 1 UL 508C
- Type of cooling: Forced convection
- Supply frequency: 50-60 Hz - 5-5 percent
- Variant: Standard Version
- Motor power
- 18.5 kW normal duty
- 15 kW heavy duty
- Maximum Horse Power Rating
- 25 hp normal duty
- 20 hp heavy duty
- Destination
- Asynchronous motor
- Synchronous motor
- EMC Filter
- Integrated 164.04 ft (50 m) EN/IEC 61800-3 category C2
- Integrated 492.13 ft (150 m) EN/IEC 61800-3 category C3
- IP Degree of Protection
- IP21IEC 61800-5-1IP21IEC 60529
- Line Current
- 33.4 A 380 V normal duty)
- 28.9 A 480 V normal duty)
- 27.7 A 380 V heavy duty)
- 24.4 A 480 V heavy duty)
- Prospective line Isc: 50 kA
- Apparent Power
- 24 kVA 480 V normal duty)
- 20.3 kVA 480 V heavy duty)
- Continuous output current
- 39.2 A 4 kHz normal duty
- 31.7 A 4 kHz heavy duty
- Asynchronous Motor Control
- Optimized torque mode
- Variable torque standard
- Constant torque standard
- Synchronous Motor Control
- Permanent magnet motor
- Synchronous reluctance motor
- Speed drive output frequency: 0.1-500 Hz
- Nominal switching frequency: 4kHz
- Switching frequency
- 2-12 kHz adjustable
- 4-12 kHz with derating factor
- Safety function: STO (safe torque off) SIL 3
- Discrete input logic: 16 preset speed
- Communication Port Protocol:
- Modbus TCP
- Modbus serial
- Ethernet
- Complementary
- Mounting Mode: Wall mount
- Maximum transient current
- 43.1 A 60 s normal duty)
- 47.6 A 60 s heavy duty)
- Phase: 3 phase
- Discrete output type
- Relay outputs R1A, R1B, R1C 250 V AC 3000 mA
- Relay outputs R1A, R1B, R1C 30 V DC 3000 mA
- Relay outputs R2A, R2C 250 V AC 5000 mA
- Relay outputs R2A, R2C 30 V DC 5000 mA
- Relay outputs R3A, R3C 250 V AC 5000 mA
- Relay outputs R3A, R3C 30 V DC 5000 mA
- Permissible temporary current
- 1.1 x In 60 s normal duty)
- 1.5 x In 60 s heavy duty)
- Physical interface:
- Ethernet
- 2-wire RS 485
- Braking to a standstill: By DC injection
- Exchange mode
- Half duplex
- Full duplex
- Autonegotiation Ethernet/Modbus TCP
- Frequency resolution:
- Display unit 0.1 Hz
- Analog input 0.012/50 Hz
- Transmission Rate:
- 10100 Mbits, 4800 bps, 9600 bps, 19200 bps, 38.4 Kbp
- Power Supply
- External supply for digital inputs 24 V DC 19-30 V), <1>
- Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %
- Internal supply for digital inputs and STO 24 V DC 21-27 V)
- Weight: 12 Kg
- Dimension W x H x D: 211 x 546 x 232mm
Description
This Schneider Altivar 630 is an 18.5 kW VFD inverter with 3-phase synchronous and asynchronous power motors. It has 3 built-in RJ45 communication ports, one Ethernet port, and two serial ports as standard. It supports working at voltages ranging from 380V to 480V AC. It has stop and go operation which saves up to 30% of energy during standby. It is suitable for motors with power ratings up to 18.5 kW.
